1 / 1
not-a-Wago and 3010 fan mount for Fysetc CNC bed frame (Voron 0) — zdjęcie 1

not-a-Wago and 3010 fan mount for Fysetc CNC bed frame (Voron 0)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Have a Fysetc CNC bed frame for your V0? Knockoff Wago's? A 3010 fan? This one's for you.

Ocena
0 / 5
Polubienia
5
Pobrania
40
Wydruki
0
Wyświetlenia
515
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v3.0

A way to mount 3 AliExpress knockoff Wago's, a 3010 bed fan, and some MicroFit 3.0 connectors. And some optional cable management.

The design is not an actual remix but inspired by Driftrotor's work (see remix section). Technically it should be possible to combine parts from both designs to fit your situation, should you need two 3010 fans or rather use actual Wago's.

Print the file bed_mount_unibody.stl if you want a single-piece mount with built-in zip tie mounts. Print not-a-wago_bed_mount.stl, bed_fan_mount.stl and cable_guide.stl if you don't need the zipties or want to combine parts.

The file drill_template.stl is meant in case you have one of the early models of the Fysetc CNC bed frame, which does not include the mounting holes needed. Tape this template to the frame and carefully drill two 3.5mm holes, preferably with a drill press or other way to ensure that you drill as straight as possible.

BOM
M3x4x5mm heat set inserts4x
M3x20mm BHCS/SHCS2x
M3x16mm BHCS/SHCS2x
3010 axial fan1x
knockoff Wago connectors3x

Tagi