Magnetic door closer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Keep a door closed, but easy to open
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 190
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
A pair of prints with space for embedded 17mm*4mm magnets to be screwed onto a latchless door and its frame to provide enough force to hold the door closed (and even pull them together when close enough) but light enough to easily be opened by a person with intent
Designed to print without supports
Recommended print orientation according to picture (if printing this way, magnet heights line up so you can insert them both in the same layer-pause command. Make sure you get the orientation of the magnets right! The bent piece is meant to be installed upside down from print orientation in the picture)
Screwholes are countersunk so you know which way round they're meant to be installed