Hex Scraper Hook For Anycubic i3 Mega
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted a simple hook for holding my scraper, but after not finding any on Printables, I decided to make my own...
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 52
- Wydruki
- 1
- Wyświetlenia
- 361
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I recently had made the Hex Scarper by Visle, and I wanted a hook for it so that it wouldn't take up so much space in my toolbox. After looking through the remixes, I could not find one for an Anycubic Mega printer. So I designed to make one myself.
I made this for my Anycubic Mega S, but I think it will work with all the Mega printers. It fits on the edge of frame. If your frame is 1.5 mm thick it will work, but if it is thicker than that it will not fit on it. When slicing lay it on its side and have supports on. Your slicer may come up with a mesh error, but it is just a small hole in the middle of the model. I will post an update when I fix it. It still prints fine with no problems.
Printing Settings:
| Resolution : | 0.2 | Support: | YES |
| Infill : | 20% | Raft: | NO |
| Material: | PLA | Filament Designation : | Black or Blue |
More designs
