1 / 2
2020, 3030 Aluminum Extrusion Corner Joint- Rose & Krieger 30mm 20mm
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 3D printed corner bracket for 3030 (30mm) aluminum extrusions. These work with Rose & Krieger extrusions available…
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 411
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (18)Powiązane
A 3D printed corner bracket for 3030 (30mm) aluminum extrusions. These work with Rose & Krieger extrusions available at Digi-Key
These can be printed with or without support material, Best print orientation seems to be with the external corner placed flat on the bed. A brim may be required. if printing with support make sure to enable supports only from print bed. Internal supports will not be removable.
10/9/19- Added a version for 2020 extrusions
Category: Robotics