1 / 4
Crowd Control - 150g Antweight Robot / Bot of Shame — zdjęcie 1
1 / 4

Crowd Control - 150g Antweight Robot / Bot of Shame

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Crowd control, our First Audience Participation Robot. Simple but effective pusher/wedge 150g UK Antweight robot

Ocena
0 / 5
Polubienia
10
Pobrania
31
Wydruki
0
Wyświetlenia
511
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Share Alike

A simple and cheap pushing robot. For the other robot in the main photo please see Edward II.

It takes 2x N20's with standard mounts, and can be ran either with a malenki, a dual ESC or even standard RC car hardware. 

Includes spots for front facing 3mm power LED's, and holes for M2 Threaded Inserts to attach acetate sheets to the scoop, a sheet between 80 and 100mm wide should work well. 

Mechanical Parts used - 

For the motor mounts:

4x M2 x 16 Socket Countersunk Screw
4x M2 Nuts

For the Lid attachment: 

4x 3 x 8 Polyfix Screws

For the Switch:

2x M2 Nuts
2x M2 x 8 Socket Countersunk Screw

Sized to use standard 44mm Wheels, but anything in the 40-50mm range should work.

Also included are the “bot of shame” parts, from an early revision of crowd control which was to be used when a competitor didn't adequately prepare. We've moved to using a Modulant now for most of the jobs this used to do. 
 

Tagi