Gridfinity Maximized Battery Storage
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Maximized battery storage for AA, AAA, 9v, D-Cell, RCR123A/CR2, Battery Chargers, and a Tester.
- Ocena
- 5 / 5
- Polubienia
- 29
- Pobrania
- 161
- Wydruki
- 3
- Wyświetlenia
- 858
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a “complete” set of Gridfinity battery storage that aims to maximize space and fit as many batteries as possible in a relatively small footprint.
The AA and AAA have ½ cutouts on either side, so if you line 2 bins up together, you can gain 1 or 2 additional battery slots per extra bin (Or keep them empty to more easy pick up bins).
Included are the following models for Batteries:
| Battery Type | Number of Batteries | Gridfinity Footprint |
| AA | 14 | 2x1 |
| AA | 14 (+1 per additional bin) | 2x1 |
| AAA | 26 (+2 per additional bin) | 2x1 |
| 9V | 6 | 2x1 |
| D-Cell | 5 | 2x2 |
| D-Cell | 8 | 3x2 |
| RCR123A/CR2 | 8 | 2x1 |
And for Chargers/Testers:
| Charger Type | Gridfinity Footprint |
| Panasonic BQ-CC17 AA & AAA Charger | 3x1 |
| CR123A Charger | 3x1 |
| BT-168 Battery Tester | 3x1 |
The base of each bin was generated using the “GridfinityGenerator” for Fusion 360.
The height for all bins is 3.5 units (24.5mm total height).
I've also included the original fusion .f3d file that contains all models.
Let me know if you want any expanded/shrunk, or new ones added.