1 / 7
Lego figures stand - stadium style
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Material consumption and space effective stand for 30 figures.
- Ocena
- 4 / 5
- Polubienia
- 34
- Pobrania
- 131
- Wydruki
- 2
- Wyświetlenia
- 789
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (6)Wydruki i komentarze (Wydruki: 2) (Komentarze: 2)Remiksy (0)Kolekcje (38)Powiązane
If you would like to add or remove fugures in single step or modify number of steps, let me know. I will add further parts.
A small drawback with the locks and easier assembly is now more complex partslist. For stand with 6 stairs and 5 figures in each row you will need:
- 1x stairs_L
- 1x stairs_R
- 7x step_5_figures (one for each stair and one extra as bottom reinforcement at back - that one helps a lot during assembly and correct alignment)
- possible to print them all at once.
- 3x stairs_center_??mm_wide
You can choose 8, 10, 12 mm wide.- 8mm for material saving or transparent filament use (100% infill takes much more time). As drawback it is a bit more rigid during assembly.
- 10mm as standard width - compromise assembly easiness and material cost / print time
- 12mm if you want more bulky design, symetric with L & R parts, very easy to assembly, as they stand by themselves.
Printer: MK2.5S
Noozle: 0.4mm
Material: PLA / PCTG (transparent) / PETG - all tested, all works
Support: not needed
Brim: not needed
TIP: enable ironing on top surfaces for step_5_figures files. Worth the look ;-).
Enjoy and happy printing ;-)