1 / 7
Lego figures stand - stadium style
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Material consumption and space effective stand for 30 figures.
- Rating
- 4 / 5
- Likes
- 35
- Downloads
- 132
- Makes
- 2
- Views
- 796
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Building Toys
- License
- Creative Commons — Attribution — Noncommercial
If you would like to add or remove fugures in single step or modify number of steps, let me know. I will add further parts.
A small drawback with the locks and easier assembly is now more complex partslist. For stand with 6 stairs and 5 figures in each row you will need:
- 1x stairs_L
- 1x stairs_R
- 7x step_5_figures (one for each stair and one extra as bottom reinforcement at back - that one helps a lot during assembly and correct alignment)
- possible to print them all at once.
- 3x stairs_center_??mm_wide
You can choose 8, 10, 12 mm wide.- 8mm for material saving or transparent filament use (100% infill takes much more time). As drawback it is a bit more rigid during assembly.
- 10mm as standard width - compromise assembly easiness and material cost / print time
- 12mm if you want more bulky design, symetric with L & R parts, very easy to assembly, as they stand by themselves.
Printer: MK2.5S
Noozle: 0.4mm
Material: PLA / PCTG (transparent) / PETG - all tested, all works
Support: not needed
Brim: not needed
TIP: enable ironing on top surfaces for step_5_figures files. Worth the look ;-).
Enjoy and happy printing ;-)