1 / 2
Foot for 2020 aluminum extrusion with 5mm slot — zdjęcie 1
1 / 2

Foot for 2020 aluminum extrusion with 5mm slot

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Foot for 2020 aluminum, connects to extrusion with M5 bolt

Ocena
0 / 5
Polubienia
0
Pobrania
20
Wydruki
0
Wyświetlenia
92
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
GNU General Public License v3.0

Needed a foot to raise my aluminum extrusion off of the floor so I designed and printed a small foot.

Connect to aluminum extrusion using a single M5 bolt screwed into a t-nut.

My print parameters:

  • Printed in PETG
  • 0.2mm layer height
  • 15% infill density
  • 1mm wall thickness
  • Printed with supports

Notes:

  • Design is hollow to save on filament
  • Flat top helps with face alignment
  • Base is thin by design to prevent rocking on surfaces which aren't flat
  • No reason why PLA wouldn't work just as well as PETG

Tagi