1 / 4
LCTH - RatRig V-Core 3.1 Toolhead mods: tensionless + beacon + dual linear
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is remix of the RatRig V-Core 3.1 Toolhead v1.0 to support front tensioners, the beacon, and dual linear gantries
- Ocena
- 0 / 5
- Polubienia
- 28
- Pobrania
- 73
- Wydruki
- 0
- Wyświetlenia
- 941
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 0) (Komentarze: 3)Remiksy (0)Kolekcje (36)Powiązane
This is the LCTH, a collection of remixed components of the RatRig V-Core 3.1 Toolhead 1.0 to support front tensioners, the beacon sensor, and/or dual linear carriages.
IMPORTANT NOTES:
- NO TENSIONERS INCLUDED ON THE TOOLHEAD
You will need to couple these parts with either a "back tensioner" (See BRS) or “front tensioners” like what is seen on the VC4 and backported to the 3.1 (See LHMM, MFBS, or others) - Parts marked “DUAL” support dual linear carriages: one on top, one on bottom. (See the original, my remix or my option for hybrid CoreXY)
- Parts unmarked are compatible with any standard gantry solution with a single carriage (Stock 2020 extrusion, tubes, etc)
Feedback Requested:
- all other mods for the existing VC3.1 RRTH v1.0 should be compatible. If you notice any conflicts please let me know.
- The beacon positioning is not optimal, but should still work. From what I understand others have used it without issue, however I still have no beacon to test with. Again if you notice anything off in your use please let me know.