1 / 7
NR200/NR200P 240mm Adapter
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter to use a 240mm Water Cooler on the top panel and keeping the fans in their original position.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 701
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
Adapter to use a 240mm Water Cooler on the top panel and keeping the fans in their original position.
I couldn't find any adapter that would keep all the original case parts and still close the glass panel.
With this adapter, I moved the radiator approximately 3 cm outwards, allowing it to work without interfering with cables, memory modules or the motherboard.
I printed it in PETG, and it's working perfectly.
No additional items were required. I used all the screws that came with the case.