Lemcott's Hybrid Motor Mod (LHMM) - RatRig V-core 3.1 Hybrid Gantry
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of the V-Core 3.1 gantry with design elements and kinematics of the V-Core 4 Hybrid CoreXY gantry.
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 927
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix of the V-Core 3.1 to include the V-Core 4's Hybrid Gantry kinematics with support for various configurations. Originally this started as solely a mod to MFBS's Gantry to support dual linear gantry, however in conversation with MFBS the idea to raise the gantry by 3mm to reduce the pendulum effect on the gantry was discussed and quickly implemented, on both stock 2020 extrusion and dual linear gantries. This then quickly spiraled into it's own design with goals to reduce the number of plates required and the number of plates currently in use going idle.
Options
Core-XY:
- Update your VC3.1 to a gantry similar to the VC4's
- Regular CoreXY Configuration still allows you to use your original 3.1 front idlers and tensioning on the EVA or RRTH as well as both FMMM plates
- a major change to the existing VC4 and MFBS options is that the entire gantry is RAISED BY 3mm to reduce any pendulum effect
- You will need to move the location of your Y Linear rails to on top of the 3030 Extrusions they are currently installed on
Hybrid Core-XY:
- all of the above notes, but by adding two additional motors this brings this mod into parity with the VC4's Hybrid gantry option
- a major change to the existing VC4 and MFBS options is that the Hybrid Belt Path is LOWERED BY 1mm for fitting, but also suspected it might effect control positively
- testing for IDEX compatibility still ongoing
Dual Linear Gantry:
- Modified printed parts to support a gantry made of dual linear rails instead of the stock 2020 extrusion or alternative tubes
- compatible with Core-XY or Hybrid Core-XY
- Fastening the two rails together us done with 10mm spacers, as well as 4x modified nylock nuts to fit within the screw head recess of the 4 outer screws that will go through the extrusion and printed parts - see the original source for the design.
- Parts labeled "DUAL"
IDEX (?):
- ?
Important Considerations:
- for those of you sourcing these gantry plates within the US (i.e. SendCutSend) an adjusted Y hybrid belt grabber is provided to make up for the slight difference in thickness from imperial metal stock.
- Not much pendulum effect was actually expected on the VC4 or MFBS' upgrade gantries but it has never been measured in any real way and the modification was easy enough to do that it made sense
- Because the belt path and rest of the gantry is raised by 3mm this might conflict with some other modifications originally implied for the stock VC3.1 or MFBS upgrade, though I'm not really sure which. You should not have any clearances with the bed reaching the nozzle as the hybrid upgrade already reduced max z by a small amount and this regains most of that
- Even though you can theoretically run the tensioners on your EVA/RRTH and front tensioners for just the hybrid belts, I would highly suggest instead moving on to front tensioners for both the hybrid belt path and the CoreXY belt path without a tensioning system on the toolhead. I have a modification of the VC3.1 RRTH v1.0 that combines the non-tensioning grabbers of the VC4's RRTH, while also supporting beacon and a number of other mods. [link coming soon]
- I highly recommend you do not print these tensioners as they exist. They are designed for additive, but for metal additive utilizing Markforged devices that print and sinter metal parts. They may last if made out of ASA-GF and kept unenclosed but that's a real big gamble I do not want people to take. I only include STLs here if anyone is daring to try it on their own liability, please let us all know how it goes. (Also please do not contact me to make these with metal, I will be the only one to produce them if permission is granted by RatRig to me)
IMPORTANT NOTE ABOUT PLATES: The gantry and motor plates are NOT standard to VC4 or MFBS's Upgrade design. This is a new design from scratch based on upgrading the 3.1 to have similar capabilities as the VC4, not a backport of VC4 parts with adjustments to make them work on the 3.1. this does mean however that this IS COMPATIBLE With 3.1 gantry joiner plates. The plates are not exactly the same, and are missing the two additional corner holes for more screws/spacers as well as the M3 taps for the hybrid belt, but if you have 3.1 plates and tools on hand then drilling+tapping those new holes is free. Even if this isn't fully recommended at least it gets you started for cheap.
Additional parts & BOM
- While stepper motors with longer shafts might be preferred, using DJ_Designs' Decoupler mod is a solid upgrade path for those looking to reuse their 3.1 motors
TO ADD: An actual BOM is coming.
Change log:
- 08/12/24 - Added Dual, organized models into folders
- 08/12/24 - Added Bare and OG31
- 21/12/24 - Clearance issue with Y extrusions fixed for all models
- 23/3/25 - minor corrections left joiner dual
- 29/3/25 - correction to bottom gantry plate DXF, removed link to heat inserts that are no longer required
- 4/4/25 - updated hybrid motor plate DXF
- 5/4/25 - updated motor cage printed part
- 6/4/25 - one more small update to hybrid motor plate dxf
Attributions and Acknowledgements
Obviously I'm relying heavily on work from both the RatRig teams and MFBS, and appreciate what they've released and discussed immensely. Shoutout to RaYa for the original FMMM mod this pays homage to and ElcoJacobs for the original VC3.1 dual linear gantry that I've been rocking for over a year before this hybrid upgrade began to develop as well as DJ for the amazing decouplers and for being a beautiful bastard. You might notice that I do not link to the original Hybrid Upgrade as a remix through printables, this is intentional as this design does not incorporate any of those parts and thus respects RatRig's BY-NC-SA on both the VC3.1 and VC4 designs. I will enforce NC unless otherwise granted permission from RatRig, and I also understand that dfue to the SA in that license I am also expected to share the step files as Ratrig has done with the originals. I will do this, however I hope I can be granted a grace period in case anyone notices issues so that I can receive that feedback and make changes instead of people going off and fixing the issue for themselves and I never update accordingly.