Articulated Redback Spider
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Articulated Spider with two leg options and the Redback butt-stripe. Includes space for magnet mounting.
- Ocena
- 4,667 / 5
- Polubienia
- 38
- Pobrania
- 486
- Wydruki
- 5
- Wyświetlenia
- 1078
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Animals
- Licencja
- Creative Commons — Attribution — Noncommercial
This articulated spider is designed to resemble an Australian Redback Spider. It includes options for different leg lengths and an optional colored press-fit "butt stripe" to match the Redback’s iconic look. Each model features an underside mounting point for a magnet.
The connections have been reinforced to be more kid-friendly, and I've had no issues with strength or breakage after multiple playtests (this thing is a hit at my partner's large office, for kids and pranks alike!).
The magnet slot is designed for a standard 6mm diameter x 3mm height neodymium magnet. For best results, use a strong glue and allow adequate drying time.
While it’s probably possible to print without one, I use a small raft. Printed using PLA at a 0.2mm layer height on an Ender CR-10 with a 0.4mm nozzle.
First original model post, feedback more than welcome!