1 / 4
Smaller Desiccant Container with Cover for 10x4.5mm Magnets — zdjęcie 1
1 / 4

Smaller Desiccant Container with Cover for 10x4.5mm Magnets

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Smaller Desiccant Container with Cover for 10x4.5mm Magnets for Prusa Enclosure

Ocena
0 / 5
Polubienia
2
Pobrania
16
Wydruki
0
Wyświetlenia
123
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial

The original desiccant container seemed a little too large for me and it used a different magnet that I had on hand so I reduced the size and changed the holes to suit.

The desiccant beads I am using are from Amazon branded as "Dry & Dry" rechargeable premium orange silica gel desiccant beads (https://a.co/d/6c9rpcs).

Magnets were purchased off Aliexpress and seemed pretty common so you should be able to find them.

The printed end product functions fine aside from the cover surface faults. Magnets were sufficiently snug when inserted and worked well.

Notes

  • v1.1 - Added a push hole at the bottom of the cover for easier removal.

Tagi