MK4/S Kludge Mount for Sturdy Phone Arm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
What better place to bolt it on than the printer itself?
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 374
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Sturdy_Phone_Arm_czfa_flexframe_screw_modmk4mount.3mf: This is a PrusaSlicer modified version of FunkyArt's czfa_flexframe_screw.stl. Rounded and shortened to mitigate nextruder cable collision. Added a hexagonal head so you can crank it down with slip-joint pliers. Sorry I don't have an STL for this; you can't export modifiers with a model in PrusaSlicer.
Sturdy_Phone_Arm_spacer_plate_modmk4mount.stl: fits on the grill indents to keep it from sliding around. This sits between the MK4 housing and the outer part of the clamp (the blue shim in the picture) and keeps the inner part of the clamp closer to the housing. Again I'm sure someone could just redesign the clamp to fit better, but hey, I'm a noob.
I found it helpful to cut out a cardboard circle (or something slightly grippy) and stick it to the bottom of the ‘CZFA_FlexFrame_BaseA_part2’ for more grip.
I printed the screw at .1mm, 8 perimeter layers, 70% infill and full support to make sure it threads well and can take my punishment when I crank the sucker. The spacer plate can print at whatever.
I may play around with this again when I have decent editing software, but until then - Happy Kluging!