1 / 9
RPi4 tower case (hide ALL cables) + optional SSD plug
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pendant RPi4 case that hides all the cables (power, ethernet and USB too). Extension for SSD can be added.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 1196
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (16)Wydruki i komentarze (Wydruki: 0) (Komentarze: 2)Remiksy (0)Kolekcje (21)Powiązane
I have a home assistant server made from RPi4 and it was quite messy with all the cables. So here is an unique case, that hides then in a way, that all come from back side.
The housing offers a bit of space for using the header pins - placing a custom PCB or fan connector.
Clearances on hooks are at least 0.15mm, larger at some paces (after optimizing)
3-part print
- PCB-SIDE
- houses the RPi4 attached RPi holes (2,7mm). 3-7mm screws are ok. If you have longer, put washer or bugger nut on the top. See enclosure hole options for
- 1,5mm (for small woodscrew)
- 1,7mm (for M2 bolt)
- 2,3mm (for M2,5 bolt)
- houses the RPi4 attached RPi holes (2,7mm). 3-7mm screws are ok. If you have longer, put washer or bugger nut on the top. See enclosure hole options for
- FAN-SIDE
- for 40mm fan (32mm x 32mm attachment holes). Made for M3 bolt.
- Has 4 hooks that require tiny supports. I used new snug supports in PrusaSlicer 2.4 with paint-on-support smart fill feature.
- Snap off the supports and you will be ready to go.
- STAND-SLIDER
- Slides and secures the two parts and acts as a stand
- Optional version with socket for SSD (EVOLVEO TINY M110Gbs)
I downloaded RPi4 3D model here:
- https://grabcad.com/library/raspberry-pi-4-model-b-1