1 / 3
Mercedes R129-02 Old School phone mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This allows the addition of a mercades phone to be mounted to the dash.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 56
- Wydruki
- 0
- Wyświetlenia
- 882
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
I modified a phone I got off ebay to allows the LEDS to work.
I used a 200ohm resistor to limit the current to around 10 mAh.
Then I wired the LEDS in 4 parallel groups, each containing 2 LEDS. I then used a coiled ethernet cable and cut the end off to add a new looking wire to the phone.
I spliced a few wired into an existing phone charger which used 12V and a buck boost converter to bring the voltage to 4V.
The printed parts is a mount that holds the phone at an agle towards the driver.