1 / 3
Mercedes R129-02 Old School phone mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This allows the addition of a mercades phone to be mounted to the dash.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 56
- Makes
- 0
- Views
- 877
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
I modified a phone I got off ebay to allows the LEDS to work.
I used a 200ohm resistor to limit the current to around 10 mAh.
Then I wired the LEDS in 4 parallel groups, each containing 2 LEDS. I then used a coiled ethernet cable and cut the end off to add a new looking wire to the phone.
I spliced a few wired into an existing phone charger which used 12V and a buck boost converter to bring the voltage to 4V.
The printed parts is a mount that holds the phone at an agle towards the driver.