1 / 1
Plug to seal a port - range: ⌀4 up to ⌀45mm
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
To be prepared if a hose or a pipe needs to be temporary sealed, I have designed this plugs.
- Ocena
- 0 / 5
- Polubienia
- 28
- Pobrania
- 94
- Wydruki
- 0
- Wyświetlenia
- 305
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (56)Powiązane
The plug contain a nose-piece to remove the part e.g. with a plier.
Print instruction:
- material: FLEX filament to seal a pipe | PETG or ASA to seal a hose
- supports: not required
- layer height: 0,2mm or 0,3mm
- nozzle diameter: 0,4mm or 0,6mm
- brim: not required
- enclosure: not required