1 / 1
Plug to seal a port - range: ⌀4 up to ⌀45mm
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
To be prepared if a hose or a pipe needs to be temporary sealed, I have designed this plugs.
- Rating
- 0 / 5
- Likes
- 28
- Downloads
- 94
- Makes
- 0
- Views
- 305
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial
The plug contain a nose-piece to remove the part e.g. with a plier.
Print instruction:
- material: FLEX filament to seal a pipe | PETG or ASA to seal a hose
- supports: not required
- layer height: 0,2mm or 0,3mm
- nozzle diameter: 0,4mm or 0,6mm
- brim: not required
- enclosure: not required