Mount for Water Filter Cartridge / Halterung für BWT Wasserfilter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
4,87 € – 5,95 € netto (bez VAT)
Dla pliku: BWTBracket_v1,0_0.4n_0.2mm_PLA_MK4IS_4h41m.gcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 5,41 € netto (środek widełek).
- Masa podana przez autora
- 83 g
- Czas druku podany przez autora
- 4,68 godz.
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
Bracket to mount a BWT bestmax water filter cartdridge underneath the kitchen sink
- Ocena
- 5 / 5
- Polubienia
- 1
- Pobrania
- 34
- Wydruki
- 1
- Wyświetlenia
- 446
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
If you're long enough into specialty coffee or tea and successfully climbed out of the rabbit hole of mixing the perfect brewing water yourself, you will eventually buy a more reliable water filter system than those table jug or pitcher filters (of which you never know how effective they work and what water you're getting out). Because these advanced filter cartridges with fixed water supply are quite bulky and heavy, I made these brackets to mount them neatly and space saving under the kitchen sink.
This mount is for BWT bestmax filters size V (total height without bracket 420mm).
Printed with PLA in 0,2mm structural preset. Supports are needed like shown in the Prusaslicer screenshot. To mount it on the right hand side simply mirror the model in the slicer.
Each bracket gets mounted with two screws (M4 or M5). The upper/front part has a little ring which holds the Besthead Flex adapter to prevent the cartridge from spinning and keep the hose in place. The lower/rear part features a little clip underneath to hold the lower hose.
The model to mount the aqua meter can be found right here: https://www.printables.com/model/717457-mount-for-bwt-aqua-meter
// German:
Wer sich lange genug mit Kaffee oder Tee beschäftigt, wird früher oder später bei einem Filter mit Festwasseranschluss wie dem BWT Bestmax landen. Da die Kartuschen recht voluminös und schwer sind, habe ich diese Halterung erstellt, um den Filter sauber und platzsparend unterhalb der Küchenspüle zu montieren.
Die Halterung ist für die Filtergröße V (Höhe ohne Bügel 420mm)
Gedruck in PLA mit dem 0,2mm Struktur Preset. Stützen werden benötigt wie im Prusaslicer Screenshot gezeigt. Um es auf der rechten Seite zu montieren einfach das Model im Slicer spiegeln.
Jede Halterung wird mit zwei Schrauben montiert (M4 oder M5). Die vorder/obere Halterung hat einen kleinen Ring, welcher den Besthead Flex Kopf hält und den Filter am Rotieren hindert und die Schläuche in Position hält. Die hintere/untere Halterung hat eine kleine Klammer unterhalb, welche den unteren Schlauch hält.
Die Halterung für das Aquameter ist hier zu finden: https://www.printables.com/model/717457-mount-for-bwt-aqua-meter