1 / 4
Volcanco Fanshroud for ZOrbiter V1.5 Extruder — zdjęcie 1
1 / 4

Volcanco Fanshroud for ZOrbiter V1.5 Extruder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Volcano-Fanshroud for E3D´s Volcano-Hotend to use it on the ZOrbiter V1.5 Extruder

Ocena
4,333 / 5
Polubienia
5
Pobrania
39
Wydruki
1
Wyświetlenia
522
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Volcano-Fanshroud  for E3D´s Volcano-Hotend to use it on the ZOrbiter V1.5 Extruder 

this remix is based from

ZOrbiter V1.5 Geared Extruder by ZARIBO

and

Prusa MK3S and MK3S+ Fan Duct with PINDA Support by KalleKnall

 

you need  

2 x M3x10 Screw

1x M3x20 Screw

1x HexNut M3

 

i print it in ASA-Carbon , the Time will tell if it stays…

 

Hint ;-)

To get the Full print hight back and get no Error with the Prusa-Calibration,

use only the Z-Axis Top and Bottom Parts from Martin Wolfe´s

“Full Print Volume Volcano Modification”  

https://www.prusaprinters.org/prints/2105-full-print-volume-volcano-modification

 

This is my first public Remix, be considerate to me

Tagi