Volcanco Fanshroud for ZOrbiter V1.5 Extruder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Volcano-Fanshroud for E3D´s Volcano-Hotend to use it on the ZOrbiter V1.5 Extruder
- Rating
- 4.333 / 5
- Likes
- 5
- Downloads
- 39
- Makes
- 1
- Views
- 522
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Volcano-Fanshroud for E3D´s Volcano-Hotend to use it on the ZOrbiter V1.5 Extruder
this remix is based from
ZOrbiter V1.5 Geared Extruder by ZARIBO
and
Prusa MK3S and MK3S+ Fan Duct with PINDA Support by KalleKnall
you need
2 x M3x10 Screw
1x M3x20 Screw
1x HexNut M3
i print it in ASA-Carbon , the Time will tell if it stays…
Hint ;-)
To get the Full print hight back and get no Error with the Prusa-Calibration,
use only the Z-Axis Top and Bottom Parts from Martin Wolfe´s
“Full Print Volume Volcano Modification”
https://www.prusaprinters.org/prints/2105-full-print-volume-volcano-modification
This is my first public Remix, be considerate to me