Pedal Haptic Motor Mount Prototype
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are prototyped haptic motor mount for T300, G29 and SRP Lite pedals
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 338
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a prototyped motor mount for T300 pedals. The motors used in this model are the haptic feedback motors from the Xbox One controller.
There are slots to use zipties to hold the motors in, but be careful, as the outer holes need to be redesigned, to much tightening will break the hole.
The bolts are M4s, I found M4x12 work fantastic, perfect length.
G29 version is posted, but needs test fit.
SRP Lite version is posted, but needs test fit. It uses M5X8 bolts and M5 Washers. If the standoff is already in use, you will need to use a longer bolt, I would imagine an M5x14-M5X18, with an M5 nut on the mount side