Mobility Wheelchair Control Stick For Foot or Hand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are wheel chair control sticks I made that come in 4 sizes for controlling a wheelchairs with 5mm stud.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 200
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
These are wheel chair control sticks I made for a special little lady who was having difficulty steering her chair with the options available. They are designed to be used with a foot but they'll be perfectly suited for use by hand also. All versions are designed to go onto a 5mm stud. There are three widths that I'm uploading now but am happy to make changes upon request. The 4th version is the standard width but has the base stem removed for a lower profile mounting and will need a 5mm grub screw or other screw/bolt such as a cap head bolt to secure it down. This version hasn't been tested yet so feedback is very much welcome.
I have added detailed drawlings of measurements in the photos but below are the widths, in millimeters, of the usable space between the uprights on the sides.
Small - 100mm
Standard - 115mm
Wide - 125mm
Print with back side down. Supports are unneeded. PLA, ASA, ABS, & PETG have all been tested and work great.
High infill is recommended to avoid weakness.
With 10 walls, 80% gyroid, and 0.2 layer height, my X1C can print one in 1-1.5 hours. YMMV.
Shiny/Metallic filaments are not recommended due to their inherent brittleness.
Please let me know of any requests and feedback anyone has.