1 / 9
Ozito 18V PXC to Ryobi 36V/40V Battery Adapter — zdjęcie 1
1 / 9

Ozito 18V PXC to Ryobi 36V/40V Battery Adapter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

An adapter for 18V Ozito/Einhell batteries to Ryobi 36V/40V tools

Ocena
5 / 5
Polubienia
25
Pobrania
126
Wydruki
1
Wyświetlenia
1251
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Share Alike

I hate the idea of having different batteries for different tools or being locked into a tool brand because you've accumulated their batteries. Ryobi have some great 36V gear (40V in the USA) and I wanted to use my existing Ozito/Einhell batteries so I designed this adapter.

Due to some feedback, apparently the Ozito batteries wouldn't fit in a particular mower so I've included an alternate version which increases the height where the batteries mount so it should clear this. Let me know if it's not high enough and I can increase it as needed.

Versions:

v1.3

  • Updated Ozito mount to new version

v1.2

  • Fitment improvements

v1.1

  • Tweaked fitment issues

  • Improved the battery latch release mechanism so that is works better/properly

  • Increased the size and depth of the wiring channels and also ran direct channels from positive to negative terminals to better demonstrate series wiring for the Ozito batteries

  • Improved terminal cover for better fitment

Printing notes:

  • You'll need supports for the battery latch mechanism and for underneath the battery slide protrusions (see attached supports screenshot)

  • You don't need supports for the wire channels on the Ryobi Connector

  • If supports are auto generated in the nut channels on the Ozito Battery Mount make sure to remove them before printing because it will be hard to remove them after the print.

Parts Required:

  1. 4x M3 10mm screws and bolts

  2. Spade terminals

  3. 12AWG or 14AWG gauge wire

  4. Soldering iron

  5. Hot glue and super glue

Note: I haven't wired it up yet and I'll update this thing when I do with more instructions and more photos but the adapter fits perfectly in a Ryobi 36V tool and the Ozito batteries fit perfectly too.

Tagi