Liczymy pasujące modele…
I wanted to be able to charge my Bosch Powerpack 500 battery in my car when I'm on trips. Unfortunately the standard 4A Bosch charger pulls 170Watts which is more than my car's AC Inverter can support. I also tried to use my 300Watt Pure…
The enclosure consists of 2 parts: Top and Bottom. The XH-M609 board is placed first on the bottom case, to ensure centering, then the top part is seated over until there is no gap on the sides. The assembly is secured with 4 M3x12…
Der Adapter lässt sich ohne Stützstrukturen drucken. Benötigt werden 4 rote 6,35mm Crimp-Stecker und eine XT60BE-F Buchse sowie Kabel mit ausreichend Querschnitt (≥1,5²). Im Bild sind die Kabel noch nicht zu sehen, aber die Kabel können…
The spacing between the snapping tabs were increased by .7mm. Now it fits perfectly. I also changed the orientation so the front faces down on the print bed.
A simple holder designed to fit the Ryobi 36 volt (may be called 40V in some regions) in a vertical position.
10S4P (36V) 18650 Li-Ion battery pack for e-bike remixed with tiedown slots E-bike battery pack with case, and 18650 battery holder for 40 cells remixed with 3 slots for zip-ties or other tiedowns
I have designed the "Electric" Ebike Battery Mount for myself, but i decided to change it with you all. My Battery has 36v, 12ah and is 70x40x293mm. I have bought it on aliexpress, something like this. Battery-Pack 36v - 12ah Or you can…
BASIC MODEL: XY-SK120X BOOST BUCK MODULE (0.5-36V 0-6.0A 120W) Just a basic model of the XY-SK120X BUCK/BOOST Module
I designed a battery wall mount for my 36V battery by Bosch. I looked for wall mounts to print, but for me they were too material intensive, so I created my own one. You can fix it at the wall with four screws (in my case 3x12 TX10).…
I remixed the original to allow a Mellow Fly SH-36v2 CANBUS board to mount on the Voron Clockworks2 Stealthburner I've also made the umbilical mount a bit ticker and longer to allow for better mounting with colson-ties
Modified Umbilical Toolhead mount, to fit a Mellow FLY SHT36V2 on the Voron 0.2 Mini Stealthburner, with strain relief. Heater wires might be a bit tight, could possibly resolder the terminal screws on backwards.
Support for sht36v2 mounted behind the stepper motor, To ensure that the PCB can be positioned behind the stepper motor I also modified some parts of the vzbot printhead. BOM: 2x spacer 12mm 3x m3x8 1x m3x6 1x insert nut M3 x 4
This model includes 2 pieces, an upper and lower case for a 10s2p battery pack. Dimensions are 150x95x76mm (about 155x100x80 after heat shrink wrap). 8mm wide slots along top and bottom for 8mm nickel / copper strips. The design loops…
I needed a case for the popular SK120 module. I didn't like the designs that were on the Internet and made my own. The SK120 module is tilted at an angle of 60 degrees, which allows you to see the displays on the display well. Print…
I hate the idea of having different batteries for different tools or being locked into a tool brand because you've accumulated their batteries. Ryobi have some great 36V gear (40V in the USA) and I wanted to use my existing Ozito/Einhell…
wall mount for the Bosch 36 V battery. the wall mount can be attached with 4mm screws.
2xOzito battery to Ryobi 36v I don't have many 36V tools to test fit, so some adjustments may be needed. Let me know and I can make amendments if needed. Just need some spade terminals, M3 nuts M3x100mm bolts, wiring. If you like this…
Use an Arduino with MCP2515 to Power on the Ebike battery (MCP2515 lib needed) Used the components as described in https://www.printables.com/model/49417-bosch-36v-ebike-battery-connector-diy-2a-charger Isolate with heat shrink and hot…
Voron LGX Canbus SHT-36V2 or Style Mount for Trident / V1.8 with Step File Parts Needed 4x M3x4 Threated Inserts Canbus Mount and Drag Chain Mount 2x M3x12 Drag Chain Mount 1x M3x6 Screw for the Cable Cover
Support for the 36V battery from Bosch.
Another support for the 36V battery from Bosch (refined in OnShape).
Mit dieser Akkuhalterung zur Montage auf der Wand können Sie einfach Ihre Akkus von Husqvarna, die das "BLi-X-36V-System" haben, verstauen. Dank der leicht schrägen Rückwand bleibt der Akku stabil in der Halterung. Befestigt wird die…
A few years ago I decided to design a new battery pack for my Tante Paula Scooter to skip using Lead-acid batteries (12V x3) which will fit existing scooter's battery compartment. This project is now completely finished. The battery pack…
A replacement key for the Ozito 36V cordless mower LML-036. This part is a remix of djsan2411's model on thingiverse ( Makes for Start key for Ozito 36V electric mower by djsan2411 - Thingiverse ). He kindly gave me the fusion part file…
If you remove the factory charge port on a 1999 EZGO TXT 36V this will cover the hole. Actually it will cover all 5 holes. Also included are files in case you want to use them for templates to create something else since the hole is not…
This is a low-profile SHT36v3 board mount designed for Voron Trident printers. It may also fit the EBB36 board (not yet tested — if you’ve tried it, please leave feedback!). Changes from the original version: Mount lowered by 5 mm and…
Inspired by @DrTob's model (printables.com/model/528090), I discovered that the Bosch Professional and DIY models do not use the same housing. So I started from scratch and came up with this solution to mount the leaf blower.
I needed a mount for my hailong 36v 5 pin battery so I found an existing wall mount for a similar battery and modified it to fit my battery and added a part to allow a spare connector to side in it.
Ebike 10s4p 36v 18650 battery pack case Made in Autodesk Inventor (ipt file included)
Ryobi Adapter more space for cables Ryobi glue or press on logo
36v 10s4p 18650 battery pack for ebike with no welding connection, just pressed together nickel tapes strips Made in Autodesk Inventor (ipt file included)
A case for the Pololu Tic 36v4. The lid is secured with cable-ties. Use cable ties to secure cables to the standoffs on the bottom of the case. An optional fan can be mounted to the top. PLA 25% infill
This is a complete kit for a high capacity 36V (10S9P) lithium ion battery built with 18650 cells. It was created effortlessly in seconds using my battery designer program which you can find here: https://howtobuildabattery.com/designer/
After I build the type e-Lab based on a DSP5005 I wanted to power it with 36V to also cover higher outputs though more devices. Since I've haven't found a case for the 36V version I created my own. It uses a IEC320 mains inlet and XT60E-M…
Compatible with Bosch Professional 18 Power Battery This project forked from original https://www.thingiverse.com/thing:4174640 . You can use Bosch or any other battery adapter, i.e. Makita, Dewalt, Feng Bao and etc. All components has…
I didn't find many Fly SHT36 V3 mounts that I liked, but really liked the model from SpaceKaseJase for his Mellow Fly SHT36 V3. I wanted to use the PUG system instead of the PG7 gland and mirrored it to have the mounting holes aligned to…
With this mount you can use 2x 18V Bosch Batterys instead of 3x12V small Lead -Gel Batteries for different Toy/Teen Vehicles instead of 3x12V . For the Electric Adapter i use one from Contorion:…
The power supply features four protected voltage channels. One channel provides a variable output voltage (SK150), while two other channels each supply a constant (pre-adjusted) voltage (XL4015). The last channel serves as a USB power…
A small box for the cheap Sinilink XY-WFMS module. It is with a snapfit so no extra screws are required.
Ryobi Battery Charger Hanger with Cable Organizer and Plug Holder Description: Upgrade your garage organisation with this Ryobi Battery Charger Hanger, designed for ultimate convenience and functionality. Easily installed on standard…
PWM DC 9-55V 2000W , 0-40A Motor Speed Regulator High Power Linear Speed Control 9V 12V 24V 36V 48V KSD 9700 250V Termostat Ventilator 32, 40, 50
For my 36v Ryobi mower. The ryobi batt is 2 times more expensive as a more powerfull Parkside. Especially at Lidl's discount time.. DO NOT RECHARGE ON THE RYOBI CHARGER USE TWO PARKSIDE X20 CHARGER!! I am not responsible of any damage if…
Hello and welcome to my Mod, This allows you to Run a Pololu (https://www.pololu.com/product/3786) On the side of of the Fan duct, just requires 2 M2 Screws. The SKR doesnt have a deicated 12V allways on fan switch so i am using a step…
2x 18v Einhell battery. Remix of Lets_Gyver's model on Thingiverse.
I needed a mount for 2 Battery Capacity Meters for the Quad Car of my son. Here are the Parts i used on Amazon: https://www.amazon.de/gp/product/B0C68JF4NY/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1…
Ebike 10s4p 36v 18650 battery pack mount Made in Autodesk Inventor (ipt file included)
Remix of "Kärcher Battery wallmount" but for 36V battery
This is a 3D Model of a Electronic Power Supply for electronics project. This Model include a ATX power supply with 3 fixed Output, 3,3V-5V-12V and a variable output from 0V to 36V using a DC DC Buck Boost Converter. All electronics…
Module : Module convertisseur abaisseur 12 V vers 5 V 5 A Régulateur de Tension USB DC 9 V-36 V Transformateur abaisseur vers USB 5 V Carte de régulateur pour téléphone à Charge Rapide (2 pcs) : Amazon.fr: Informatique 2 x M3 Hex Nut 2 x…
Dies it ein Remix von https://www.printables.com/model/386295-dp50v5a-lab-bench-power-supply-case Änderungen: Frontblende: Buchsen für normale 4 mm Bananenbuchse angepasst. Rückseite: Ausschnitt für Kaltgeräteanschluss nit Schalter und…
Created to mount the Mellow Fly SHT36v3 to the Qidi X-Smart 3. Includes. 1. Backplate. Fits to exiting tool board mounts 2. Eddy Mount (Adjustable. Aim for 5-6mm from nozzle height) Needs M3 heat inserts and M3x8/10 bolt 3. Cover. Space…
Ich habe meinen Halter aus PLA gedruckt. PETG oder ABS wären sicherlich besser. Warum PLA? Nun, ich dachte, ich müsste die Halterung noch anpassen. Die Halterung passte jedoch beim ersten Versuch - und wurde montiert. Seitdem Moment hängt…
This is a wall mount for this 12v / 24v / 36v USB Charger Step Down Power Supply: https://www.aliexpress.com/item/1005002950968760.html (not an affiliate link) For 12V / 24V / 36V Solar systems. Included are all the associated Fusion 360…
Bei mir passte der Adaptern 2x 18V Akku zu 36V Akku nicht mehr in den Akkuschacht der 36V Kettensäge, da die beiden 18V Akku seitlich an der Kettensäge anstießen. Um den Abstand zu erhöhen konstruierte ich diesen grauen Zwischenring. Er…
Holster für Bosch Akkuschrauber 18v/36v. Die sind so ausgerichtet wie ichs brauch, lässt sich aber im Slicer gut spiegeln.
This is a wall mount for this 12v / 24v / 36v USB Charger Step Down Power Supply: https://www.aliexpress.com/item/1005002950968760.html (not an affiliate link) For 12V / 24V / 36V Solar systems. Included are all the associated Fusion 360…
The Honda Battery Caddy is designed to securely hold four Honda 36V batteries. It is ideal for both home workshops, and anywhere you need to take your tools! You will need: 1x M5 screw with ~30mm length 1x M5 nut Print Info: Material:…
It' a simple remix of my voron cover for MELLOW FLY SHT36v3 with Ender3 NG logo . Use 2x M3x25 SHCS
I printed this with 4 walls, and 20% insert in Petg.
I wanted to be able to charge my bosch ebike without the availability of 230V AC and without having to carry around the big original charger. To be able to charge a bosch ebike two voltage levels are required, 5V to set the battery to…
I added a 100W chamber heater to my Sovol Zero, which ended up becoming a little bit of a project. I needed to be able to control the 12V fans and heater element, and didn't have enough spare ports on the mainboard , so I used a Fly…
I hate the idea of having different batteries for different tools or being locked into a tool brand because you've accumulated their batteries. Ryobi have some great 36V gear (40V in the USA) and I wanted to use my existing Ozito/Einhell…
A beautiful flower vase for decorative purposes to hold artificial flowers. It is 162mm tall and 98mm wide. Print time approximately 1 hours 30 min. with a single wall. The photo shows the vase printed in vase mode. It can be printed in…
