1 / 6
Bosch 18 V battery powerbank / power supply — zdjęcie 1
1 / 6

Bosch 18 V battery powerbank / power supply

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Power supply and powerbank from a Bosch 18 V battery

Ocena
0 / 5
Polubienia
54
Pobrania
177
Wydruki
0
Wyświetlenia
2461
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Share Alike

This is an adapter box to turn your Bosch 18 V battery into a powerbank, or a lab power supply!

Using edge connectors that snap into the housing, a cheap 4 x USB step-down-converter module and an automotive fuse, you can use your existing batteries as an emergency supply.

Works great with your TS100 soldering iron via the XT60 plug for a portable in-the-field iron!

Using 2.5mm² wire for a 5 A automotive fuse the case does become quite cluttered, so maybe 1.5mm² and just 3 A of fuse might be easier to assemble. 

The 4mm banana jacks have the standard 0.75" spacing and can be used to supply DC-DC lab modules down the line.

The support situation can be quite tricky, so best use the attached .3mf file which uses support blockers for hard-to-get-to locations.

The trickiest thing to source is the blade terminal with locking tab. These are widely used in the car industry for confectionable plugs. The part number I found was “8KW048056-033” for a 6.3mm blade with 2.5mm² wire capacity. Getting them in is quite tight since there is JUST enough room to push the blades through from the inside. It is advised to first push them in from the outside to make room for the blades, making it easier to insert them from the back.

If you need one of my things printed or you want to suggest a modification on a part please drop me a message!

If you print one of my things i would be happy about some feedback and a make!

If you like my things please consider supporting my caffeine addiction!
 

Tagi