Neptune 3 Pro/Plus/Max Unicorn Blower with Sensor Extension
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Use a Unicorn Nozzle with the Neptune 3 Pro/Plus Max
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 51
- Wydruki
- 1
- Wyświetlenia
- 584
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Link to instructional video:
The contents are modified versions of the linked files.
The blower has had a cutout made for the sensor. The original moved the sensor location far too much for my liking, so I modified a spacer to fit the sensor length needed and a spar for stability. This only adds around 0.5mm to the Y of the Sensor position relative to the nozzle from the stock location. It can be printed slimmer in the slicer if you so choose, just make sure it is not too flimsy or it will affect your sensor accuracy.
Support on build plate setting will be needed to print the parts. Most have small areas that need a bit of support to get the print started. The fan needs the most support