1/2" socket extension bar holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Module 1/2-inch socket extension bar holder. It holds 4 extension bars.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 179
- Wydruki
- 1
- Wyświetlenia
- 476
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
Module ½-inch socket extension bar holder
It holds 4 extension bars and has an 8° angle, which makes it easy to reach the extension bars.
The holes are 18mm (11/16") and the extension bars usually has a diameter of 16.5mm (5/8"), so there is enough play for different filaments.
The tool holder module couples with the attachment plate module, print one toolholder and one attachment plate for this setup.
This module attaches to the adapater biltema or the vanilla adapter available here on Printables. The vanilla adapter can be modified so it fits wherever You need to hang these modules.
MODULA - a module based tool holder system
A universal adapter for (metric) PEG boards, this one fits Biltema, Jula, Clas Ohlson, CC 12mm (15/32 inch) spacing of the 4mm (5/32 inch) diameter screw holes.
The idea is a adapter plate (metric/imperial/plain) that attaches to a module, the module snaps on to this adapter with dovetails.
Why use an adapter? Everyone can share the modules worldwide, and just adjust the adapter plate for their needs.
