1 / 4
Ribbon Christmas tree
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The complete print consumes approximately 20g of filament (in my case PLA).
I recommend printing all the pieces without supports (the STL files already contain the correct positioning of the pieces to avoid supports).
STAR VARIANTS
INSTRUCTIONS 🧰
MY SETTINGS
Nozzle : 0,4 mm
Layer height: 0,2 mm
walls: 3
top/bottom solid layer: 6
infill type: rectilinear
infill density: 20%
NO supports
NO vase mode
ASSEMBLY
- Stretch the spring a bit so that you can work with it better;
- insert the lower end of the spring into the first hole at the base of the tree, as shown in the photo;
- insert the lower end of the spring into the second hole at the base of the tree;
- insert the tip of the tree into the hole at the top of the spring;
- place the star on top of the spring;
- enjoy! 🎄
Tagi
decorationchristmasstarminimaldecordesignnewyearsupportlesschristmasgiftgiftspringeasytoprinteasyhomeminimalistribbontreecontestdecorationsnosupportchristmasornamenteasyprintchristmasdecorationchristmasdecorationschristmastreechristmasornamentshomedecoreasyassemblynosupportsneedednosupportschristmasdecorhomedecorationsupportfreenatalealberomolla2024homedecorationsalberodinatale