1 / 4
Ribbon Christmas tree
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An easy to print ribbon Christmas tree without supports.
- Rating
- 0 / 5
- Likes
- 18
- Downloads
- 71
- Makes
- 0
- Views
- 348
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Winter & Christmas & New Year's
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The complete print consumes approximately 20g of filament (in my case PLA).
I recommend printing all the pieces without supports (the STL files already contain the correct positioning of the pieces to avoid supports).
STAR VARIANTS
INSTRUCTIONS 🧰
MY SETTINGS
Nozzle : 0,4 mm
Layer height: 0,2 mm
walls: 3
top/bottom solid layer: 6
infill type: rectilinear
infill density: 20%
NO supports
NO vase mode
ASSEMBLY
- Stretch the spring a bit so that you can work with it better;
- insert the lower end of the spring into the first hole at the base of the tree, as shown in the photo;
- insert the lower end of the spring into the second hole at the base of the tree;
- insert the tip of the tree into the hole at the top of the spring;
- place the star on top of the spring;
- enjoy! 🎄
Tags
decorationchristmasstarminimaldecordesignnewyearsupportlesschristmasgiftgiftspringeasytoprinteasyhomeminimalistribbontreecontestdecorationsnosupportchristmasornamenteasyprintchristmasdecorationchristmasdecorationschristmastreechristmasornamentshomedecoreasyassemblynosupportsneedednosupportschristmasdecorhomedecorationsupportfreenatalealberomolla2024homedecorationsalberodinatale