LayersFactory
Zgłoś model
1 / 3
Magnet Rewinder for "Filament Dry Box with Rollers" — zdjęcie 1
1 / 3

Magnet Rewinder for "Filament Dry Box with Rollers"

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Sven

Sven

@Sven_1357546

Implemented a magnet in the roller so the spool can be rewinded from outside

Ocena
4,8 / 5
Polubienia
105
Pobrania
247
Wydruki
5
Wyświetlenia
3852
Oceny
5

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (10)Wydruki i komentarze (Wydruki: 5) (Komentarze: 48)Remiksy (2)Kolekcje (209)Powiązane

 

I was looking for a way to rewind the filament in the dry box without opening the box, then I came up with the idea of installing magnets in the roller and that's how this model came out, I'm very satisfied with the result, I've tried different things, but this solution works the fastest.

 

Support me

If you like my work and want to support me, you can give me a donation on ko-fi:
https://ko-fi.com/sven_49 


SHOWCASE VIDEO



What you need:

BUY

 

PRINT

      FOR THE AXIS

  • 1x “AXLE  - normal roller”
  • 1x “AXLE  - magnet roller”
  • 1x “AXLE  - axle”
  • 2x “AXLE  - secure pin”
  • 2x "AXLE - tpu cover” (https://svelte.printables.com/model/967723-roller-cover)

     MAGNET PEN

  • 1x “MAGNET PEN - bottom”
  • 1x “MAGNET PEN - top"

    SLIDING BASE

  • 1x “magnet sliding base” (Split it into parts, and change the color of the arrow, if you want it with the white arrow, otherwise just leave it as it is)

 

PRINT SETTINGS:

  • Layerheight:                0.2mm
  • Rafts:                               no
  • Supports:                      no
  • Material:                    PLA+ & TPU
  • Wallgenerator:         Arachne
  • Detect Thin Walls:   On
  • Infill:                            Gyroid

 

Assembling the axis

 

Assembling the magnet pen (make sure that the magnet pen magnet and the roller magne repell each other, its better that way, because we dont want friction of the box)

 

Assembling the magnet sliding base

Get the magnet base and the alignment frame and put some double sided tape on the magnet base. Put the magnet base into the alignment frame and align the bottom left corner of the alignment frame with the corner on the handle of the box

 

Updates:

08/03/25: Updated the roler base, now it doesnt prevent from opening the box or makes it harder. Added a press fit magnet pen for 2 magnets, and updated the images

18/02/25: REMIXES ARE NOW ALLOWED

22/12/24: Made the sliding base thiner (reduced the height)

16/12/24: Added pins to secure the axle preventing it from moving. Also reduced the bottom height of the sliding base by a bit

Tagi

dryboxrewindermagnet