Frontal mount point for Voron 2.4 Decontaminator mod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount point to have decontaminator purge brush on front, and coexist with nevermore
- Ocena
- 5 / 5
- Polubienia
- 23
- Pobrania
- 43
- Wydruki
- 2
- Wyświetlenia
- 483
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Mount point to have decontaminator purge brush on front, and coexist with nevermore and other probes.
You can achieve the same result with a real 2020 profile (about 6cm, see photo) and 2 angular mounts, but hey printed with voron logo is better right?
it has phantom faces, 0,01mm of depth that slicer will ignore for printing, but let you color the Voron logo and print it multicolor (two possible option).
Make sure to print with at least voron profile to resist the heat from the bed.
Use 2 M3x8mm to secure to the front base profile.
In picture you can see I also used https://www.printables.com/model/659369-voron-24-purge-bucket-silicon-brush-wiper and https://www.printables.com/model/768112-voron-24-a1-bambu-silicone-brush-wiper/files to mount Bambu A1 like silicon brush instead of the original brass one to be more gentle to the nozzle.