28 modeli
A remix of a mounting arm I found in the Voron Discord. Unfortunately I don't know who created this. I made this one from scratch and also added the step. You need 2xM3x12, 2x extrusion nuts and 2 heat inserts. You can find some example…
Allows using BambuLabs Wiper with Voron Decontaminator buckets. Features: wall guard for easy bucket mounting even with imprecise hand movements mount holes in positions where Voron Decontaminator bucket mod expects them (for magnets…
Brenden D'Paula made an excellent mod to use the Bambu A1 silicone brush. I was looking to make one from scratch but decided to remix his instead as it was designed very elegantly. I remodeled it slightly so that it will work with the…
I did this mod specifically for the Micron/Micron+ printers, but it probably can fit any 1515 extrusion printer. Multiple bucket sizes are included. Print using standard Voron settings. M3x6mm screws for mounting. Follow the directions…
Trident right angle bracket + mount for use with Bambu rubber scrubber strips and nozzle wiper. You can get them from Bambu's site and are easily replaceable if they get broken. I included spacers at 0.25, 0.5, and 1mm so that you can…
This is a remix of another remix. I found with the original model that it does not fit around LDO's version of the Trident endstop switch due to it being physically larger. Also, LDO's bed mount is a few mm taller than a “base” Trident so…
This is a quick remix of the excellent mod on voron github: https://github.com/VoronDesign/VoronUsers/tree/master/abandoned_mods/printer_mods/edwardyeeks/Decontaminator_Purge_Bucket_&_Nozzle_Scrubber…
Just a remix of Decontaminator Brass Brush holder to use Bambulab A1 Whiper https://eu.store.bambulab.com/fr-fr/products/heatbed-nozzle-wiper-a1 note : Bed must be at 20mm upper 2020
After print the original model with a random PC blend and using for a while, I found the stopper soften and was deformed. I remodel the designed so more support is provided for the bed stopper.
This allows you to replace the brass wire brush of the Decontaminator Purge Bucket mod with silicon. Print all the standard parts of…
This is a modified version of the Decontamintor Purge Bucket for 300mm allowing for the klicky mod. This is only the purge bucket, you will still need the brush holder. The original design along with the suggested klicky arm bracket would…
A remix of @jinetix_1639540 nozzle scrubber to work with kinetic mount.
I recently build an LDO 300 Trident with a Cartographer probe and wanted to use the decontaminator bucket/arm. But since they recommend using a silicone brush from Bambu (for obvious reasons) I had to modify LDOs model to raise the…
More robust version of the standard bedstop to avoid long-term deformation, compatible with LDO kit bed spacers
I shortened the holder for the A1 Mini wiper by 5mm to fit my bed height on my 2.4r2. Now, it butts up against the bed plate, and it also acts as an indexing stop for the magnetic PEI sheet. Thanks to @Flustered for the original!
Mount point to have decontaminator purge brush on front, and coexist with nevermore and other probes. You can achieve the same result with a real 2020 profile (about 6cm, see photo) and 2 angular mounts, but hey printed with voron logo is…
mirror the scrubber if you want it on the other side
I don't recall if I changed any other geometry, but this works with my LDO-spec 300mm bed perfectly. (Actual bed dimension is 305mm). YMMV. I intend to remove the decontaminator eventually and switch to its single pin sheet stop, but for…
Raises the Decontaminator brush mount up 15mm to work with kinematic bed mount. update 2025-01-20: added standalone endstop. print on side.
I think the original Bucket and Brush from "edwardyeeks" is great, but I wanted bigger bolts at the back (3mm instead of 2mm), and I wanted the bucket on the right side. The brass brush seems to do a much better job when printing really…
I like my decontaminator setup on my trident, but I don't want to use brass brushes anymore. I find the silicone ones to be way more effective. This is a single part change of the decontaminator setup to just make that single change. The…
I wanted to be able to use a Cartographer for the z-probe on my Voron v2.4, but liked the source nozzle scrubber and sheet stops from edwardyeeks. I updated this mod to use a Bambu A1 silicon nozzle brush, and M3x12 SHCS for the sheet…
A drop-in replacement to use instead of a brass brush in case you have a H2D nozzle wiper pad laying around. I found the wiper pad quite consistent in cleaning the nozzle before printing in comparison between the brass brush and the A1…
A remix of a mounting arm I found in the Voron Discord. Unfortunately I don't know who created this. I made this one from scratch and also added the step. You need 2xM3x12, 2x extrusion nuts and 2 heat inserts. You can find some example…
A drop-in replacement to use instead of a brass brush in case you have a H2D nozzle wiper pad laying around. I found the wiper pad quite consistent in cleaning the nozzle before printing in comparison between the brass brush and the A1…
The Trident decontaminator bucket wiper is shorter than the one for the 2.4. This mod merges the two.
You need two magnets, a few screws and inserts and a piece of PTFE pipe ;) The arm fits my printer. The distance from the vertical profile to the edge of the bed is 95 mm.
BOM 2x - M2 heat set inserts 2x - M2 X 8mm screws Providing the Step file in case you don't have m2 heat sets/screws, but the hole on the wiper isn't that big. The biggest screw you could fit is 2,5mm.
