1 / 3
Decontaminator Purge Bucket & Nozzle Scrubber - remix for A1 Silicon Brush and 3mm screws
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My changes to the brush holder and sheet stop
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 120
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (11)Powiązane
I wanted to be able to use a Cartographer for the z-probe on my Voron v2.4, but liked the source nozzle scrubber and sheet stops from edwardyeeks. I updated this mod to use a Bambu A1 silicon nozzle brush, and M3x12 SHCS for the sheet stops.
ABS or better is required as this sits less than 1mm from the bed.
BOM (changes only):
3x M3x12 SHCS
A1 Silicon Brush - I used these: https://a.co/d/05YeJoUU
The macros and purge buckets are available at the linked original source.