1 / 3
Energy Chain starter 10mm lifter - holder Creality K1 (K1C) — zdjęcie 1
1 / 3

Energy Chain starter 10mm lifter - holder Creality K1 (K1C)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

When printing in the rear-left area, the chain often gets heavily crumpled and almost jams, this lift can prevent

Ocena
4,667 / 5
Polubienia
23
Pobrania
237
Wydruki
2
Wyświetlenia
794
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

The flexible energy chain of the Creality K1 printer is located between the moving printhead and the printer's frame. When printing in the rear-left area of the bed, this chain often gets heavily crumpled and almost jams when the head presses it against the frame. By raising the frame-mounted side of the chain, we can prevent this issue from occurring. What I designed raises the starting point of the chain by about 10 mm. You can pop out the factory-installed starting link from the other chain links, and by removing the two mounting screws, it can easily be replaced with the elevated version.

I've been using this for a while with my own custom-designed roof lifting system. I haven't tried it with the factory low roof. I’d be happy to receive feedback if you print it and my design works!

More printer parts and good thinks: https://cults3d.com/en/users/ChrisMix/3d-models

Tagi