Energy Chain starter 10mm lifter - holder Creality K1 (K1C)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
When printing in the rear-left area, the chain often gets heavily crumpled and almost jams, this lift can prevent
- Rating
- 4.667 / 5
- Likes
- 23
- Downloads
- 237
- Makes
- 2
- Views
- 794
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
The flexible energy chain of the Creality K1 printer is located between the moving printhead and the printer's frame. When printing in the rear-left area of the bed, this chain often gets heavily crumpled and almost jams when the head presses it against the frame. By raising the frame-mounted side of the chain, we can prevent this issue from occurring. What I designed raises the starting point of the chain by about 10 mm. You can pop out the factory-installed starting link from the other chain links, and by removing the two mounting screws, it can easily be replaced with the elevated version.
I've been using this for a while with my own custom-designed roof lifting system. I haven't tried it with the factory low roof. I’d be happy to receive feedback if you print it and my design works!
More printer parts and good thinks: https://cults3d.com/en/users/ChrisMix/3d-models