Cat Key Hook - Wall Mounted (Non-HSW)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An edited version of the original to remove the HSW connection to allow wall mounting using hidden screws.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 285
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
THIS ONLY CONTAINS MY MODIFIED FILES!
For the other parts, please go to the original model, posted below:
https://www.printables.com/model/442612-cat-key-hook-for-hsw
----------------------------------------------------------------------------------------------------------------
I saw this, and knew a friend would like it. Unsure if they will actually make use of this, however I made it regardless, in case others might want to make this without the HSW system.
This version simply screws to the wall using two screw holes hidden inside the box. The front panel slides on/off and clicks into place to allow access to the holes. I went the extra mile to hide the screw holes, as I realised slapping two toruses/tori on the side would ruin the look.
Oddly, the M3 version is like, .8mm thicker on the base. As such, do not mix versions, as they will look weird. Or do. Your choice tbh.
----------------------------------------------------------------------------------------------------------------
BOM:
- 1x M3x30 Screw (Only for the M3 Hinge version)
- Wall mounting hardware (Such as rawl plugs and screws for brick)
----------------------------------------------------------------------------------------------------------------
Changes:
- Front panel now slides off.
- Hidden screw holes on the inside (Accessible via front panel)