Rokform Magsafe Adapter for Quad Lock Vibration Dampener (Parametric)

          This idea has been bumping around in my mind for a while now. I want to protect my phone from the vibrations of the motorcycle, but I'm not a fan of the attaching method of both Rokform and Quadlock. Rokform's case is better, but Quadlock's vibration dampener looks better and is more accessible to modifying. I also wanted it to be magnetic, since the magnets in Rokform's case are crazy strong. 

          If you are one of the few people who have a Rokform case, but don't like Rokform's vibration dampener, this model is for you. 

          Files that have w/ hex are meant to be tightened with M3 nuts. The latter is meant to be tapped by the screw itself.

          I've included the FreeCad 1.0 file for making small adjustments, or remixing.

Materials

6x  Button head M3 x 8mm/6mm screws

6x  M3 nuts (for hex files)

1x   M5 x 12mm screw

1x   Gasket (optional)

1x   Magsafe ring https://totalelement.com/collections/magsafe-neodymium-magnets/products/54-x-46-x-2-5mm-magsafe-neodymium-rare-earth-magnet-phone-attachment-ring-assembly-with-alignment-magnet-5-pack?rfsn=8420400.433dad7&utm_source=refersion&utm_medium=affiliate&utm_campaign=8420400.433dad7

3x  3/4" magnet 1/8" thick https://totalelement.com/collections/disc-magnets/products/3-4-x-1-8-inch-neodymium-rare-earth-disc-magnets-n52-12-pack?rfsn=8420400.433dad7&utm_source=refersion&utm_medium=affiliate&utm_campaign=8420400.433dad7
 

Print settings

Material: ASA (be mindful that it will probably be outside for long periods of time.)

5 perimeters

0.4 nozzle

0.2 layer height

~60% Cubic infill

Instructions

1. Decide whether you want to use nuts to tighten the pieces together or just by the thread of the screw. If you are using the hex files, put the m3 nuts into their slots.
2. Grab your Rokform case and align the top piece with the magnets on the back of the phone case. This step is necessary, as it will help the magnets snap and stay in place.
3. Carefully place your magnets into the 3d printed part in such a way that they snap into their intended position.
4. OPTIONAL: place the gasket over the magnets
5. Sandwich the bottom piece and tighten with M3 screws

At the moment, I have the Top, bottom, and gasket ready to go. The handlebar mount in the FreeCAD file is still not very editable. It'll work well for you if your handlebar is around 29mm and your U-bolt is 38mm in diameter.

DISCLAIMER

By using or distributing this 3D model, you acknowledge that the model is provided "as is" without any warranties, express or implied, including but not limited to fitness for a particular purpose, merchantability, or non-infringement. The creator is not responsible for any damage, injury, or loss resulting from the use or misuse of the model, whether in relation to the mounting system, the phone, the motorcycle, or any other equipment involved. It is the user's responsibility to ensure proper installation and use in accordance with safety standards. Always verify compatibility and safety before using the model.