Ender 5 Plus Mercury One.1 Enclosure Top-Hat
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a fully 3D printed top hat to enclose an Ender 5 Plus Mercury One.1
- Ocena
- 0 / 5
- Polubienia
- 71
- Pobrania
- 178
- Wydruki
- 0
- Wyświetlenia
- 1942
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
This is a 3D printed top-hat to enclose an Ender 5 Plus Mercury One.1
To use the top-hat enclosure, you will need the following:
- Inside Frame Stepper Mounts https://www.thingiverse.com/thing:5996645
- Fizzy Tech's Panel Clips for 2020 Extrusions https://www.thingiverse.com/thing:5996645
- 6mm total thickness panels (3mm thick panels + 3mm foam tape) - refer to the PDF for tested sizes
The design uses printed dowels, which may require resizing. If I recall correctly, the default size at 100% scaling is too loose.
The only hardware required is some M5 bolts to attach to to the tapped holes at the front of the extrusions and some M4 bolts and t-nuts (6 of each M4 hardware).
You'll need to mirror the bottom corners and top corners.
Special thanks also to the Zero G group for their Mercury One.1 design.
If you've got any questions, please let me know :)