Ender 5 Plus Mercury One.1 Enclosure Top-Hat
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a fully 3D printed top hat to enclose an Ender 5 Plus Mercury One.1
- Rating
- 0 / 5
- Likes
- 71
- Downloads
- 178
- Makes
- 0
- Views
- 1,961
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Public Domain
This is a 3D printed top-hat to enclose an Ender 5 Plus Mercury One.1
To use the top-hat enclosure, you will need the following:
- Inside Frame Stepper Mounts https://www.thingiverse.com/thing:5996645
- Fizzy Tech's Panel Clips for 2020 Extrusions https://www.thingiverse.com/thing:5996645
- 6mm total thickness panels (3mm thick panels + 3mm foam tape) - refer to the PDF for tested sizes
The design uses printed dowels, which may require resizing. If I recall correctly, the default size at 100% scaling is too loose.
The only hardware required is some M5 bolts to attach to to the tapped holes at the front of the extrusions and some M4 bolts and t-nuts (6 of each M4 hardware).
You'll need to mirror the bottom corners and top corners.
Special thanks also to the Zero G group for their Mercury One.1 design.
If you've got any questions, please let me know :)