1 / 3
IGS PGM Cartridge Shell Through-hole
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- GNU General Public License v2.0
This is a replacement shell for IGS PGM Cartridges. Especially if you are looking for a case for your Fluffy boards.
This is a variant to my previous design that used heat set inserts. In this you can use standard screws and nuts. If you print in PLA, this is the better option as there is no stress on the screw posts.
Mine were printed in PLA at 0.2mm layer height.
Screws are M3 30mm (head hight up to 3mm) with M3 nuts.