MTB Fork mount 20mm boost and non boost for display of fork
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
MTB Fork mount 20mm boost and non boost, Created for help to mount and display old mtb forks in workshop.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 438
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
They are made for usage with mtb forks with 20mm axles, so no problem in using the mounts for forks with 15mm axles and again these mounts are just meant for usage to display old mtb forks in workshop, so not for usage to mount and support the entire bike in.
Mounts are made for boost 110mm and non boost 100mm with front hubs, but the mounts are made with just a little free space on either side to make sure they fit what ever is mounted in them.
Due to the old design of the forks I tested with I had to add a block of wood behind the mount, but on the other fork i tested with that had a never post mount for the breaks the block of wood was not needed.
Top of the fork is just secured with a bungee cord that is screwed into the wall