Wera Kraftform Screwdriver Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed for IKEA SKÅDIS boards, this holds 6 x WERA 2035 precision screwdrivers using the 'T-Clip' locking system.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 59
- Wydruki
- 1
- Wyświetlenia
- 270
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
Holder for a WERA 2035/6 Kraftform precision screwdriver set that makes the inserting and removal of each screwdriver quick and simple.
Each screwdriver pocket is designed to match the WERA hex handle design and allows the screwdriver to be held securely without rotating so that the size and shape information can positioned facing forward.
Installation is straight forward as the design uses a location tab for initial placement and then held securely or easily repositioned using the popular ‘T-Clip’ mounting system.
Optimum Print Settings:
- Standard 0.4 mm nozzle and 0.2 mm layer height is fine.
- Prints directly from the base surface.
- No supports are needed.
- Infill - 20% recommended but can be increased as required.
- Variable layer height is a sensible option if you care about the cosmetics of the curved surfaces.