Mount for the Prusa Buddy3D Camera
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fits inside the enXLosure enclosure
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 65
- Wydruki
- 3
- Wyświetlenia
- 627
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a simple camera mount for the Prusa Buddy3D camera. It does fit inside the enXLosure enclosure (I highly recommend it if you're thinking of adding an enclosure). I don't know if it will fit inside the Original Prusa XL Enclosure.
It will work with one-head and dual-head XLs but I don't think it will work with the five-head version.
In the back right corner of the frame there's a 6mm torx bolt, replace that with a 3mm x 16mm hex bolt to attach the mount. The camera is held at the just the right angle to view the entire printbed. There's a support built into the model so you don't need add supports, it just breaks off.
Fortunately, there's a small space in the enXLosure frame, just big enough to pass a USB cable to power your camera. I've also uploaded a replacement PSU cover with USB port so you can power your camera directly from the printer.