Mount for the Prusa Buddy3D Camera
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fits inside the enXLosure enclosure
- Rating
- 5 / 5
- Likes
- 11
- Downloads
- 65
- Makes
- 3
- Views
- 627
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
This is a simple camera mount for the Prusa Buddy3D camera. It does fit inside the enXLosure enclosure (I highly recommend it if you're thinking of adding an enclosure). I don't know if it will fit inside the Original Prusa XL Enclosure.
It will work with one-head and dual-head XLs but I don't think it will work with the five-head version.
In the back right corner of the frame there's a 6mm torx bolt, replace that with a 3mm x 16mm hex bolt to attach the mount. The camera is held at the just the right angle to view the entire printbed. There's a support built into the model so you don't need add supports, it just breaks off.
Fortunately, there's a small space in the enXLosure frame, just big enough to pass a USB cable to power your camera. I've also uploaded a replacement PSU cover with USB port so you can power your camera directly from the printer.