Pine car derby wheels V1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Made some pine car derby wheels for my kids. There are two designs: one that can accommodate a nail as an axle, the…
- Ocena
- 5 / 5
- Polubienia
- 2
- Pobrania
- 19
- Wydruki
- 1
- Wyświetlenia
- 85
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution
Made some pine car derby wheels for my kids. There are two designs: one that can accommodate a nail as an axle, the second you can add a bearing and a screw as an axle to make things a little faster.
Bearing details: 5mmx11mmx4mm (Common RC Car Bearings)
Wheel width is 3mm versus the bearing being 4mm wide. There is a little space between the wheel and the derby car. Cant have the wheel touch the car can we!! :)
Bearings are similar to the ones used in RC cars like traxxas, axial, redcat and many others. Very common and cheap bearing. Check amazon.
Our cars with the bearings are fast and the black one is undefeated in the school. I used some washers as spacers and screws to attach the wheels to the car. Used a large big washer as a weight and voila!!! Dont over tighten the screw to the car too much, it needs to be a little loose. ;)
Race on!
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
**Rafts:**
Doesn't Matter
Resolution:
1.5
**Infill:**
25
Category: Vehicles