Roku TV Remote SKADIS Mount with T-Nuts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remote holder for a TCL Roku TV that mount to an IKEA SKADIS pegboard using the T-Nut System.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 68
- Wydruki
- 0
- Wyświetlenia
- 276
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Share Alike
I have a SKADIS pegboard by my bed, and wanted a way to store my Roku TV remote without taking up space on my nightstand. Thankfully, someone had created a remote holder and provided the Fusion 360 files on here. I made a couple quick edits to better suit my needs and remove a bit of unneeded material, and while it's a bit messy I am sharing my .f3z file as well in case anyone needs to make minor adjustments.
This is made to fit a remote for a 2020 TCL Roku TV, it may fit some similar models as well. The holes are sized for M3 screws for the T-Nuts, but you can either resize them in Fusion or use some washers for M2 or M2.5 screws. The files for the SKADIS T-Nuts and more information about the system are available here. I used one of the M3 printed thread nut remixes and it's holding just fine. Screw length should be about 15mm.
Any firm filament should be fine for printing, I used PETG and default settings other than 3 perimeters. Print in vertical orientation as loaded. You shouldn't need supports or a brim, but if you are having trouble printing feel free to use what works for you.