1 / 3
Arrma Typhon Grom - Honeycomb Street Bumper — zdjęcie 1
1 / 3

Arrma Typhon Grom - Honeycomb Street Bumper

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Low bumper for the Arrma Typhon Grom

Ocena
5 / 5
Polubienia
25
Pobrania
201
Wydruki
2
Wyświetlenia
1203
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial

UPDATE 1/8/25: 

It appears I uploaded the older version of this bumper. There is a newer version that has been reinforced with more connective material towards the flex point that should prevent any eventual tearing. This is now uploaded as V2, and includes a 3MF file as well with the modifier part already set up. Overall it's wider and more durable. 

ORIGINAL POST:

I wanted something to protect my Grom while bashing around in the street. This has taken some very heavy hits and done a great job protecting the front of the car.

The bumper mounts right under the bumper using the stock screws. It runs very low so this is really only optimal for street - if you hit any jumps the bumper may bottom out and throw off your trajectory.

Print in TPU with 1 walls and barely any infill; 5% should be fine. Ideally set up the slicer so that the mounting plate part of the print has about 25% infill (grid works well) because you want it to compress when you tighten the stock screws back into the diff.

You'll also want to limit the number of top and bottom layers to 2-3 each.

Tagi